We are fully committed to contributing to mobilizing scientific to develop real solutions to the challenges of the Covid-19 outbreak
Follow
More…

University of Huelva

Technology Transfer Office • Spain • 5 followers

Follow
More…

Latest Open Innovation Opportunities

  • Technology Offers (21)

Mixer and Substrate Packing Machine for hydroponic crops and the like.

The machine is designed to beat and fill sacks of substrate for hydroponic cultivation, among other applications. The invention is in the area of new techniques of cultivation of the land. Hydroponic cultivation facilitates and potentially increases the production without needing preparation and it also improves its collection.

Mixer and Substrate Packing Machine for hydroponic crops and the like.
  • +6 months
  • Hide post

Manual Handler of Concrete Sleepers

The machine was designed to disengage steel bars from prefabricated concrete sleepers manually, which allows to increase production, safety at work and to improve the technical properties of the final product. The stretcher has two benches that allow movement in two directions, longitudinal and trasnverse. The process is done in such a way that the four active screws are de-stressed at the same time, avoiding damages.

Manual Handler of Concrete Sleepers
  • +6 months
  • Hide post

Synchronized exchange energy method and device between users of the electric grid for decentralized management

The method comprises defining fragments of energy to be demanded at given time intervals by consumers of the electrical network, negotiating their purchase with providers or other users capable of bidding, synchronizing production and consumption, and storaging or providing the difference between the negotiated fragment and the amount of energy actually demanded or suplyed with zero-impact on the grid

Synchronized exchange energy method and device between users of the electric grid for decentralized management
  • +2 months
  • Hide post

New plasmid and strategy for expression of exogenous proteins in eukaryotic microalgae by translational fusion with a selectable marker

This plasmid solves the problems of low efficiency and instability of transgenes in the genetic manipulation of microalgae, as well as offers a procedure for the expression of high amounts of the protein of interest and better transformation efficiency

New plasmid and strategy for expression of exogenous proteins in eukaryotic microalgae by translational fusion with a selectable marker
  • +2 months
  • Hide post

NEW CONFIGURATIONS OF CC-CC CONVERTERS OF ONE INPUT AND MULTIPLE OUTPUTS WITHOUT TRANSFORMER AND POWER CONVERTER THAT APPLY THEM

It presents new configurations of CC-CC converters of single input and multiple outputs, without transformer, with a single input inductor. For its operation a single power switch is required, therefore, a single control circuit, which results in a smaller size, lower weight and simplicity compared to known systems

NEW CONFIGURATIONS OF CC-CC CONVERTERS OF ONE INPUT AND MULTIPLE OUTPUTS WITHOUT TRANSFORMER AND POWER CONVERTER THAT APPLY THEM
  • +2 months
  • Hide post

INHIBITOR SYSTEM AGAINTS HARDWARE ATTACK ON THE I2C BUS

The effect of a clock glitching attack over the I2C communication process between master and slaves could have serious consequences in robot and control industrial system. This inhibitor is capable of detecting and defending attacks against to the clock signal in the I2C
  • +2 months
  • Hide post

Construction procedure of vertical wells with interior cladding

The invention is about a method of constructing vertical large wells, which are excavated by bivalve spoons, and are composed with an inner cladding based on cylindrical rings of reinforced concrete. The invention is especially intended for the excavation of wells in soils with clayey or silty layers, which do not easily disintegrate and therefore make it difficult to lower the cylindrical rings which will form the inner coating or cladding.

Construction procedure of vertical wells with interior cladding
  • +4 months
  • Hide post

Possibility of identifying nautical headlights at the distance that reaches the light if the headlights.

An instrument is proposed for the automatic identification of nautical lights in river or maritime navigation, also applicable on mainland. The invention must address a specific problem consisting of optimizing the adjustment of the optical system for the different incoming light intensities.

Possibility of identifying nautical headlights at the distance that reaches the light if the headlights.
  • +4 months
  • Hide post

AUTONOMOUS DETECTION AND SIGNALING CROSSWALK SYSTEM

Autonomous device and system for vehicle detection and crosswalk signaling oriented to form a visual warning barrier especially applicable to the field of road safety. The system has several innovative features: 1) low cost, which makes possible real deployment on roads; 2) small size, which entails a minimal impact for both users and environment; 3) placed over the track, which does not require public works; 4) autonomous, so it does not require electrical wiring; 5) smart, so it interacts with pedestrians and vehicles.

AUTONOMOUS DETECTION AND SIGNALING CROSSWALK SYSTEM
  • +4 months
  • Hide post

DC-DC CONVERTER WITH BIPOLAR OUTPUT AND ITS USE FOR CONNECTION OF A DISTRIBUTED GENERATION SYSTEM TO A BIPOLAR DC GRID

The converter has an input for connecting a monopolar DC source and a bipolar DC output, with the same voltage but with opposite polarities. It is useful for the connection of a distributed generation system to a bipolar DC grid. For these applications, the proposed topology is a solution with sufficient guarantees of reliability, quality and performance. The converter circuit is very simple, it includes three inductors, four capacitors, two diodes and a power switch as a switching device.

DC-DC CONVERTER WITH BIPOLAR OUTPUT AND ITS USE FOR CONNECTION OF A DISTRIBUTED GENERATION SYSTEM TO A BIPOLAR DC GRID
  • +4 months
  • Hide post

Measurement system for the identification and accurate determination of distorting loads in electrical networks and microgrids

The only measurement of distortion level in a network can highlight the need for action to control it. Among those actions is, for example, the use of power filters. However, the determination of the most suitable point where the filter must be connected and its most appropriate configuration requires further analysis of the micro-network (a subset of nodes in the network with different loads connected to each). Therefore, an additional study becomes necessary to establish the responsibility of each load in global distortion levels. In addition, the establishment of the model of the most responsible loads is also necessary in order to decide the filter configuration. In this sense, the load may be voltage distorting or current distorting. All this information is provided by the device of the invention. Indeed, the device, besides distributing the responsibility for overall levels of distortion between each agent, reports whether loads are voltage harmonics or current harmonic sources. This information is the most relevant to determining the power filter settings that best mitigate the distortion in each network node.

Measurement system for the identification and accurate determination of distorting loads in electrical networks and microgrids
  • +4 months
  • Hide post

Method for the combined foaming/modification of bitumens for use in paving

This patent describes a cost-effective foamed bitumen process to be applied for cold recycling of aged flexible road pavements. Additionally, the base bitumen used is in-situ modified during the process and, consequently, both low and high temperature properties result remarkably improved. Finally, waste gypsum and phosphogypsum are preferably used to form the foam

Method for the combined foaming/modification of bitumens for use in paving
  • +2 months
  • Hide post

Auto-assemblable RJ45 male connector

On the one hand, the invention does not require a crimp tool, which is ideal for cabling operations that require quickness. On the other hand, the innovation allows reusing the RJ plug as many times as required until properly assembling the copper pairs. Furthermore, the connector incorporates an identification by color codes for wiring according to the ANSI/TIA-968-A-2002 standard, which is ideal for people with limited dexterity on IT.

Auto-assemblable RJ45 male connector
  • +2 months
  • Hide post

New device and system for the recovery of communication equipment

The present device is focused on the automatic recovery of operating systems for routers and switches, which is one of the fundamental claims on this invention since there are no current devices in the state-of-the-art for such purposes. Another particularity that distinguishes to the present invention is that it is not only software or hardware in contrast to other approaches, but of a complete hardware/software device (i.e, both capabilities are combined). Another of the most significant singularities is its portability, since the invention is based on a reduced size device (non rackable) and made up of autonomous battery. This allows to carry out any function with total freedom to move. Besides the comfort, it contributes a great improvement in working time, since operating with distant devices implies an additional time in turning off, turning on again, and enabling the necessary services to start the recovery procedure. As additional feature, the invention looks for the universality and independence from manufacturers or device model. Besides this purpose, another differentiated function is the capability to store the firmware of the communication devices to be recovered (i.e., the image of the operating system) through an internal physical storage unit of great capacity.

New device and system for the recovery of communication equipment
  • +2 months
  • Hide post

New method for manufacturing powder metallurgy magnets

The conventional method of press followed by furnace sintering is now substituted by an electrical consolidation method. This allows joining in a single step the previous pressing/sintering processes, and, due to the promptness of the process, the use of controlled atmospheres is not necessary. The steps of magnetization, and eventual thermal treatments, can be carried out in the same container, without being necessary to manipulate the product.

New method for manufacturing powder metallurgy magnets
  • +2 months
  • Hide post

New method for manufacturing magnetic cores by powder metallurgy

Magnetic cores in amorphous state are usually produced by placing together very thin amorphous ribbons from a material obtained by the melt-spinning technique. The new patented method produces the amorphous material by mechanical alloying, a traditional process in the powder metallurgy field. This technique allows a higher control on the amorphisation process and the properties of the amorphous obtained powders. These powders are then consolidated by the very quick process known as Electrical Resistance Sintering (also Electrical Discharge Consolidation/Sintering can be used). A final amorphous material, without the typical frontier between ribbons of melt spinned materials, which clearly affect properties, is obtained.

New method for manufacturing magnetic cores by powder metallurgy
  • +2 months
  • Hide post

New procedure for the genetic transformation of plant cells and kit for carrying out said method

The strategy for transformation is extremely simple and does not involves subcloning the gene of interest in any vector. The kit is not based on specific promoters or regulatory DNA sequences, thus it can be applied to many different plant species, from unicellular microalgae to higher plant protoplasts. Since the strategy is not based on specific promoter or regulatory DNA sequences, only the marker and the gene of interest sequences are inserted in the microalgal genome, avoiding the introduction of undeserible DNA sequences in the transformant strain. This is very important given the concern that transfer of exogenous DNA through transgenesis causes in the public opinion

New procedure for the genetic transformation of plant cells and kit for carrying out said method
  • +2 months
  • Hide post

Procedure for obtaining a renewable resource of metals from acid minewater, and the respective systems

Is known in the state of the art the recovery of metals from the acid aqueous solution that contain them, generally by liquid-liquid extractions. For metals recovery at industrial scale is necessary that these metals can be recovered simultaneously by means of a single extraction step. There are several extraction reagent for this purpose, all these reagent are very expensive and the industrial process for the metal recovery (particularly for rare earth and yttrium) are very complex and finally expensive. The present procedure allows to recovery selectively metals (particularly rare earths and yttrium) by the neutralization of acid mine waters. The objective is to revalue the metal content dissolved in this waters.

Procedure for obtaining a renewable resource of metals from acid minewater, and the respective systems
  • +2 months
  • Hide post

New procedure for the purification of water contaminated by metals and the respective systems

The invention solves the problems of inefficiency which usually shows the conventional passive treatment systems. The reactive fills developed for the removal of inorganic contaminants historically have focused on removing low concentrations of these (typical features of coal mining), however when these fillers are faced to high concentrations of metals (sulfur mining, uranium, industrial water waste…) quickly clogging and loss of reactivity occurs. The present invention allows the removal of metals without clogging and/or loss of reactivity. This is achieved by the use of a coarse inert material with high surface mixed with a fine-grained reactive material, so that the surface of the inert material is breaded with reactive material. Coarse fragments of inert material act as a frame, providing large pores that reduces clogging by precipitates. The small particle size of the reactive material provides a large surface area that increases its reactivity.

New procedure for the purification of water contaminated by metals and the respective systems
  • +2 months
  • Hide post

Power supply system controlled from internet for devices connected to a lan

Nowadays there are devices that allow the control of devices connected to a network from the own network. The classical method to access them from a different network is the redirection of the corresponding TCP or UDP connections to local networks from the border router. The redirection requires a high level of expertise in communications to be performed. Another strategy that is often used is the creation of VPN (virtual private network). This technique allows the control of access but does not allow connections to be discriminated or the management of power supply. The proposed system allows you to control the person and the moment to access as well as the free access. The modification of these constrains can be performed in the course of an access session. In addition, the system allows the control of power supply of the device you want access to. The interface is very friendly and does not require continuous changes in the configuration of the router. The system has a local database access control and validation can be delegated to other servers using protocol validation like LDAP, IMAP, POP3, etc.
  • +6 months
  • Hide post

New power generation electric system

The proposed system is characterized by the following aspects which make it unique: 1- The system is built from a number of PEM fuel cells, supplied by al least one hydrogen source. Each module include a monitoring and control subsystem, so it is possible to activate/deactivate module induividually. 2- Each module can supply a different power value. 3- The monitoring and control subsystem receives electrical signal from each modules like stack voltage, stack current and cell voltage. 4- The monitoring and control system has two levels: the first level aims to control each module (local control) and the second level is responsible for coordinate local controller. 5- The monitoring and control system is on-line accessible. 6- The control and monitoring system distributes homogeneously the operating hours between the modules when the power demand is lower than the maximum power. 7- Each module has a oxygenation/cooling subsystem which supplies oxygen to cathide and air for refrigerate the stack. 8- Each module has a hydrogen subsystem wich is the responsible for hydrogen delivery to stack at ambient pressure. 9- The hydrogen subsystem include a hydrogen purge line. 10- The Electric Power Generation System includes a simulator to reproduce the performance ogf the whole subsystem.

New power generation electric system
  • +2 months
  • Hide post

About

The Technology Transfer Office (TTO) is a service of the University of Huelva attached to the Vice-chancellor of Research, Postgraduate and International Relations. Its mission is to get companies and institutions in Huelva are scientifically advanced entities, by encouraging close collaboration in R&D between researchers, enterprises, and institution

Contact person

http://uhu.es/otri
–
–
–
Technology Transfer Office
–
–

About our Innovation Strategy

We are currently seeking best-in-class collaboration partners for our publications listed in the tab Opportunities. We want to invite you to cooperate with us, so please repond to any of the opportunities by submitting one or more proposals. Our team will directly evaluate them and get back to you with a response. Please provide as much detailed non-confidential information as possible to facilitate the engagement process.

Research areas (3)

Industrial manufacturing, Material and Transport TechnologiesAgriculture and Marine ResourcesChemicals and Materials

Latest Job Offers

University of Huelva has't published any job offer yet

Latest Events

University of Huelva hasn't published any Event yet

Related profiles

Innoget © 2020 Innoget